Short Track GT3 Ice Blade

Short Track GT3 Ice Blade
Short Track GT3 Ice Blade
Short Track GT3 Ice Blade

Short Track GT3 Ice Blade


Regular price $449.00
/
Style
Shipping calculated at checkout.

The Bont GT3 short track ice blade is made with the best Japanese knife steel. It also benefits from all the technology, research, and development of the new Platinum blade. This blade has the same materials as the Platinum apart from the steel. The GT3's steel is tempered using our 20+ years of short track blade making expertise.

Specifications
  • Cup material: Aluminum 7075 T6
  • Radius: 9m
  • Length: 14", 14.5", 15", 15.5", 16", 16.5", 17", 17.5"
  • Blade thickness: 1.1mm
  • Hardness: 64 Rockwell
  • Bend: Machine bent
  • Not pre-sharpened
Buy with confidence

You can always buy Bont Skates with confidence. Skaters have been buying Bont Skates since 1975 and we are the world’s largest manufacturer of inline speed skates and short track speed skates and custom skates as well as one of the largest manufacturers of roller derby skates.

We have a reputation for looking after our customers. We do everything possible to ensure that our products are made to the highest standards. As an example, all of our boots go through 16 individual stages of quality control before they are shipped out.

Our inline wheels, roller skate wheels and frames are all tested for strength and fatigue on the computer using the most advances computer-aided stress testing available. Bont bearings are produced in partnership with some of the best speciality bearing manufacturers in the world.

All Bont products go through a rigorous team testing phase before being brought to market. Team Bont skaters are the very best in the world.

When you buy Bont Skates, you get the best skates on the market. 

Technology - Consistency Consistency has been the focus when creating our ice speed skating blades. Machining time is expensive and blade manufacturers grind the steel in batches at high speeds to reduce costs. This results in the steel warping due to the high temperature of the grinding stone grinding the steel. Our aim for the GT3 and the Platinum was to make every blade the same so we purchased the best grinding stones from Germany and we slowly grind one set of steel blades at a time. This is an extremely slow process with higher costs but the result is steel that has no warping. All skaters, not just Olympians, should enjoy perfect blades. However, we didn't stop with the grinding. We looked at the other aspects of making the blade even more perfect. We developed a new stronger glue that allowed us to reduce the tube slot width by 0.1mm. The tube slot needs a certain amount of room for the glue on either side of the blade. The greater the gap, the more chance the steel has to warp while the glue sets. By reducing this gap, we improved the consistency of the straightness of the blade after gluing. Lastly, we invested heavily in jigs. Each blade is clamped in 9 locations while it sets and we let the blades set for 14 hours until the glue has fully cured. This means that we can only make a few sets of blades per day, but each set is perfect.
Technology - Pre-Bent

Aluminum tubes do not like to be bent. They always spring back to the straight position. To solve this problem, we have two solutions:

  • We make the tube out of an aluminum that is more likely to stay bent than other brands of blades.
  • We cut the slot for the steel blade in the aluminum tube on a slight bend. The tube is straight but the steel blade is already on a slight curve. This curve is slight and you will still need to bend the blade more to get the optimum bend to suit your radius. However, you now only need to bend the aluminum tube a very small amount to get your optimum bend. This small amount of tube bending is not enough to stress the tube and the result is a blade that holds it's bend for a much longer period. Some skaters may never need to re-bend their blades.

Pre-Bent

Technology - Team Testing Ice

Our professional speed skating team are some of the best skaters in the World. They love to give us feedback! From the little things like the placement of the buckle to trialing the latest materials, they help Bont create products that not only look good but perform at the elite international level.

Technology - Team Testing Ice

Our professional speed skating team are some of the best skaters in the World. They love to give us feedback! From the little things like the placement of the buckle to trialing the latest materials, they help Bont create products that not only look good but perform at the elite international level.

LIGHTER. STRONGER. FASTER.

We push the limits of technology to help you perform at your best.